View FHESH03AXLCT46G_6648478.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

hermaphroditic push-pull connectors sh-mh series
? ? www.lemo.com precision modular connectors to suit your application since it?s creation in switzerland in 1946 the lemo group has been recognized as a global leader of circular push-pull con- nectors and connector solutions. today lemo and its affiliated companies, redel and coelver, are active in more than 80 countries with the help of over 40 subsidiaries and distributors. over 50?000 connectors the modular design of the lemo range provides over 50?000 connectors from miniature ? 3 mm to ? 50 mm, capable of han- dling cable diameters up to 30 mm and for up to 106 contacts. this vast portfolio enables you to select the ideal connector configuration to suit almost any specific requirement in most mar - kets, including medical devices, test and measurement instruments, machinery, audio video broadcast, telecommunications and military. lemo?s push-pull self-latching connection system the lemo self-latching system allows the connector to be mated by simply pushing the plug axially into the socket. this self-latching system is renowned worldwide for its easy and quick mating and unmating features. it provides absolute secu- rity against vibration, shock or pull on the cable, and facilitates operation in a very limited space. ? ul recognition lemo connectors are recognized by the underwriters laboratories (ul). the approval of the complete system (lemo connector, cable and your equipment) will be easier because lemo connectors are approved. ce marking ce marking means that the appliance or equipment bearing it complies with the protection requirements of one or several european safety directives. ce marking applies to complete products or equipment, but not to electrome- chanical components, such as connectors . rohs lemo connectors are in compliance with the rohs directives (2002/95/ec) of the european parliament. this directive spec- ifies the restrictions of the use of hazardous substances in electrical and electronic equipment marketed in europe. lemo guarantees that its connectors are free of mercury, cadmium, lead, hexavalent chromium and polybromide biphenyl (pbb) or polybromide diphenyl ether (pbde). once firmly latched, connection cannot be broken by pulling on the cable or any other component part other than the outer release sleeve. when required, the connector is disengaged by a sin- gle axial pull on the outer release sleeve. this first dis- engages the latches and then withdraws the plug from the socket.
? ? www.lemo.com 1 fixed socket fha fhe eha ehe fwa fwe straight plug standard version (ip 50 when mated) fixed socket fixed plug fixed plug straight plug sealed version (ip 68 when mated) fha fhe straight plug straight plug the lemo hermaphroditic series provide a rugged high performance patented push-pull hermaphroditic interconnection system. these ?genderless? connectors combine lemo?s well proven push-pull latching technology and the use of our standard high quality optical and electrical contacts. the main features of these series are as follow: ? security of a new patented push-pull hermaphroditic self-latching system ? 2 shell sizes, sh and mh series ? compact unsealed version for general purpose applications ? rugged waterproof (ip 68) version for all outdoor applications ? a choice of multifibre or electrical contacts configurations ? lightweight design with shell in anthracite nickel-plated aluminium alloy ? low loss ceramic pc technology in multimode and singlemode ? gold plated electrical contacts. each series consists of plug and socket which will accept cable diameter ranging from 3.6 mm to 10 mm. initial program is giving solutions with 2, 4 or 6 fibre optic channel and 6 or 12 electrical contacts. part section showing internal components 5 shell latch sleeve inner shell spring circlip 4 3 5 1 2 collet nut insulator optical contact cable adapter bend relief 9 8 10 6 7 1 6 9 10 3 8 7 4 2 3 7 1 2 8 9 10 6 5 4 sh-mh series
outer shell, collet nut 1) latch sleeve other metallic parts spring insulator electrical contacts o-ring and gaskets material (standard) alum. (aa 6262a or aa 6023) special brass alum. (aa 6262a or aa 6023) stainless steel peek brass (male)/bronze (female) silicone mq / mvq ?5? 0.5 3 ? ?5? without treatment without treatment 0.5 3 1 without treatment surface treat (m) nickel cu ni au notes: 1) anthracite colour materials and treatments 2 ? ? www.lemo.com technical characteristics 0.18 db iec 61300-03-34 0.25 db iec 61300-03-34 45 db iec 61300-03-06 >25 db iec 61300-03-06 method 2 method 2 coupler method coupler method optical average insertion loss fibre 9/125 m average insertion loss fibre 50/125 m return loss fibre 9/125 m (upc) return loss fibre 9/125 m (hand polish) characteristic value standard method mechanical and environmental 2000 cycles iec 60512-5 test 9a -55c to +125c 1) 10-2000 hz, 15g iec 60512-4 test 6d 100 g, 6 ms iec 60512-4 test 6c ip 68 iec 60529 up to 2 meters depth ip 50 iec 60529 600 n 300 n iec 60512-8 test 15f 800 n 400 n mating durability temperature range vibration resistance shock resistance protection index fhe/fhe water immersion fhe/fhe protection index fha/fha plug/plug plug/socket plug/plug plug/socket value standard characteristic electrical > 10 12 iec 60512-2 test 3a < 3.6 m iec 60512-2 test 11f < 10 m iec 60512-2 test 2f insulation resistance contact resistance shell resistance value standard characteristic sh series average latching retention mh series ffs.f2.ba2.lce30 = male f2 type fibre optic contact, ferrule bore diameter of 125 m, peek body, zirconia ceramic ferrule, crimp cable fixing, for tight jacket cable with a diameter between 1.7 to 3.0 mm. fiber optic contact ffs f2 fibre type: (page 5) body: l = peek ba2 fo contact type: f2 for sh.03a & mh.03c f7 for sh.03c & mh.03e lc e30 ffs = male contact model: pss = female contact ferrule material: c = zirconia ceramic cable ? for f2: t10 = 0.25 to 1.1 mm e30 = 1.7 to 3.0 mm cable ? for f7: e23 = 0.25 to 2.0 mm part number example a different part number structure is applicable for each of the following product types: ? plugs and fixed sockets; fibre optic contacts. note: the fibre optic contacts must be ordered separately. an equal number of contacts must be ordered (eg. for mh.03c; 2 x ffs.f2 and 2 x pss.f2). fhe.mh.03c.xlzt76n = straight plug (ip 68 when mated), mh series, multifibre to accept 4 f2 type fibre optic contacts, anthracite nickel plated aluminium shell, peek insulator, with cable fixing type t for 7.5 to 6.6 mm cable and black bend relie f. fhe mh anthracite nickel housing: x = plated aluminium cable fixing and ? (for plug): (page 5) bend relief colour (for plug): n = black, g = grey, r = red lv contact type: (page 5) 03c series: (page 4) model: (page 4) xlzt76n type: (page 5) insulator: l = peek straight plug with bend relief component notes: 1) with f.o. contacts temperature range - 40c /+ 80c
? a s 2 ~m ~n ~l straight plug with cable adapter or collet and nut with bend relief reference model series dimensions (mm) almns2 fha sh fha mh 21.8 98.4 82.2 46.2 13 25.4 109.3 89.1 47.1 15 fha s 2 s 1 s 3 ~l ? a e ? b m e maxi fixed plug, nut fixing reference model series dimensions (mm) a b e e l m s1 s2 s3 fwa sh fwa mh 28.5 28.5 m22x1 14 55.0 26.5 20.5 14 25 34.0 34.0 m25x1 17 64.5 31.5 23.5 17 30 fwa b + 0.1 0 ? a + 0.1 0 dim. (mm) ? a b series sh mh 22.2 20.6 25.2 23.6 panel cut-outs 3 ? ? www.lemo.com e ? b s 1 s 3 m 7 maxi n ~l ? a p fixed socket, nut fixing reference model series dimensions (mm) a b e m n p s1 s3 eha sh eha mh 27 28.5 m22x1 38.8 30.5 19.5 30.5 3.3 20.5 25 32 34.0 m25x1 40.8 37.0 24.5 37.0 4.3 23.5 30 eha l optic elect . b + 0.1 0 ? a + 0.1 0 dim. (mm) ? a b series sh mh 22.2 20.6 25.2 23.6 panel cut-outs models - series
4 ? ? www.lemo.com ? a s 2 ~m ~n ~l straight plug with cable adapter or collet and nut with bend relief (ip 68 when mated) reference model series dimensions (mm) almns2 fhe sh fhe mh 28.5 98.4 90.0 54.0 13 34.0 109.3 98.9 56.9 15 fhe e ? b s 1 s 3 m p 7 maxi n ~l ? a fixed socket, nut fixing (ip 68 when mated) reference model series ehe sh ehe mh ehe dimensions (mm) a b e m n p s1 s3 28.5 28.5 m22x1 38.8 30.5 19.5 30.5 11.1 20.5 25 34.0 34.0 m25x1 40.8 37.0 24.5 37.0 14.1 23.5 30 l optic elect . dim. (mm) ? a b b + 0.1 0 ? a + 0.1 0 series sh mh 22.2 20.6 25.2 23.6 panel cut-outs s 2 s 1 s 3 ~l ? a e ? b m e maxi fixed socket, nut fixing (ip 68 when mated) reference model series dimensions (mm) a b e e l m s1 s2 s3 fwe sh fwe mh 28.5 28.5 m22x1 14 55.0 26.5 20.5 14 25 34.0 34.0 m25x1 17 64.5 31.5 23.5 17 30 fwe b + 0.1 0 ? a + 0.1 0 dim. (mm) ? a b series sh mh 22.2 20.6 25.2 23.6 panel cut-outs
5 note: other arrangement, optical, electrical or mixed optical-electrical can be made available upon request. warning: there is no contact number on the insulator. when wiring one hermaphroditic connector, one should terminate each contact to its mirror image number of the other connector. 125 126 128 9/125 50/125 62.5/125 ? core/cladding ferrule hole note (m) ? (m) ? ? www.lemo.com sh mh f2 nb f7 nb contact nb ? a (mm) solder crimp test voltage (kv rms) test voltage (kv dc) rated current (a) contact type awg max awg low voltage contact fo contact 03a 03c 306 2? ? ?? ? ??? ?4 ? ?? ? ??? ? ? 6 1.3 20 18-20 1.5 2.1 12 03c 03e 312 4? ? ?? ? ??? ?6 ? ?? ? ??? ? ? 12 1.3 20 18-20 1.0 1.5 8 ? a ? a reference plug socket electrical contact fibre type reference a c l contact type solder for plug crimp for plug solder for socket reference m z contact type crimp for socket no contact reference for f7 contact 125 126 128 reference for f2 contact ba2 bb2 bd2 first choice alternative special order alternative 4.5 3.6 5.5 4.6 6.5 5.6 7.5 6.6 t46 t56 t66 t76 cable ? max min ref. sh 5.5 4.6 6.5 5.6 7.5 6.6 8.5 7.6 9.0 8.6 t56 t66 t76 t86 t91 mh adapter ?t? for fibre optic connectors 5.0 4.1 6.0 5.1 7.0 6.1 8.0 7.1 c52 c62 c72 c82 cable ? max min ref. 6.0 5.1 7.0 6.1 8.0 7.1 9.0 8.1 10.0 9.1 c62 c72 c82 c92 c10 collet ?c? for electrical connectors cable diameter insert configuration
6 ? ? www.lemo.com accessories cap (for fha and fwa plugs) ? a l 6 sliding loop bfa body material: anthracite nickel plated aluminium alloy lanyard material: stainless steel crimp ferrule material: nickel-plated brass + polyolefin maximum operating temperature: 125c watertightness: ip50 according to iec 60529 bfa.sh.100.xaz bfa.mh.100.xaz dim. (mm) al 21.8 23.5 25.4 30.0 part number cap (for fhe and fwe plugs) ? a l 6 sliding loop bfe body material: anthracite nickel plated aluminium alloy lanyard material: stainless steel crimp ferrule material: nickel-plated brass + polyolefin o-ring material: silicone rubber maximum operating temperature: 125c watertightness: ip68 according to iec 60529 bfe.sh.100.xas bfe.mh.100.xas dim. (mm) al 28.5 23.5 34.0 30.0 part number cap (for fha and fwa plugs) n ? 3.5 ? a l 6 bha body material: anthracite nickel plated aluminium alloy lanyard material: stainless steel crimp ferrule material: nickel-plated brass + polyolefin maximum operating temperature: 125c watertightness: ip50 according to iec 60529 bha.sh.100.xaz bha.mh.100.xaz dim. (mm) aln 21.8 23.5 120 25.4 30.0 120 part number
7 ? ? www.lemo.com cap (for fhe and fwe plugs) ? a l 6 n ? 3.5 bhe body material: anthracite nickel plated aluminium alloy lanyard material: stainless steel crimp ferrule material: nickel-plated brass + polyolefin o-ring material: silicone rubber maximum operating temperature: 125c watertightness: ip68 according to iec 60529 bhe.sh.100.xas bhe.mh.100.xas part number dim. (mm) aln 28.5 23.5 120 34.0 30.0 120
8 ? ? www.lemo.com tooling description fibre optic cleaning kit of 2 cotton buds, 1 dry and 1 being soaked in ipa (isopropyl alcohol) used for cleaning the fibre optic contacts. dcc.91.312.5la extraction/installation tool for f2 fibre optic contact wst.ki.125.34 cleaning kit for f2 fibre optic contact contact alignment device tool for f2 or f7 fibre optic contact part number dcs.f2.035.pn dcs.f7.035.pn 1) dcs contact type f2 f7 note: 1) included in the lemo f7 workstation. extractor for f7 fibre optic contact part number dcc.91.307.5la 1) dcc description manual tool for the extraction of the f7 contact. note: 1) included in the lemo f7 workstation. description simple tool with two threaded end for installation/extraction of the f7 contact alignment device.
? ? www.lemo.com please read and follow all instuctions carefully and consult all relevent national and international safety regulations for your application. improper handling, cable assembly, or wrong use of connectors can result in hazardous situations. 1. shock and fire hazard incorrect wiring, the use of damaged components, presence of foreign objects (such as metal debris), and / or residue (such as cleaning fluids), can result in short circuits, overheating, and / or risk of electric shock. mated components should never be disconnected while live as this may result in an exposed electric arc and local overheating, resulting in possible damage to components. 2. handling connectors and their components should be visually inspected for damage prior to installation and assembly. suspect components should be rejected or returned to the factory for verification. connector assembly and installation should only be carried out by properly trained personnel. proper tools must be used during installation and / or assembly in order to obtain safe and reliable performance. 3. use connectors with exposed contacts should never be live (or on the current supply side of a circuit). under general conditions voltages above 30 vac and 42 vdc are considered hazardous and proper measures should be taken to eliminate all risk of transmission of such voltages to any exposed metal part of the connector. 4. test and operating voltages the maximum admissible operating voltage depends upon the national or international standards in force for the application in question. air and creepage distances impact the operating voltage; reference values are indicated in the catalog however these may be influenced by pc board design and / or wiring harnesses. the test voltage indicated in the catalog is 75% of the mean breakdown voltage; the test is applied at 500 v/s and the test duration is 1 minute. 5. ce marking ce marking is applied to a complete product or device, and implies that the device complies with one or several european safety directives. ce marking can not be applied to electromechanical components such as connectors. 6. product improvements the lemo group reserves the right to modify and improve to our products or specifications without providing prior notification. product safety notice
lemo headquarters switzerland lemo sa chemin des champs-courbes 28 - p.o. box 194 - ch-1024 ecublens tel. (+41 21) 695 16 00 - fax (+41 21) 695 16 01 - e-mail: info@lemo.com lemo subsidiaries austria lemo elektronik gesmbh lemb?ckgasse 49/e6-3 1230 wien tel: (+43 1) 914 23 20 0 fax:(+43 1) 914 23 20 11 sales@lemo.at china lemo trading (shanghai) co., ltd. lemo electronics (shanghai) co., ltd. 5th floor, block 6, city of elite, 1000 jinhai road, pudong shanghai, china 201206 tel: (+86 21) 5899 7721 fax: (+86 21) 5899 7727 cn.sales@lemo.com denmark lemo denmark a/s gammel mosevej 46 2820 gentofte tel: (+45) 45 20 44 00 fax: (+45) 45 20 44 01 info-dk@lemo.com france lemo france srl 165, avenue jean jaurs 94700 maisons alfort tel: (+33 1) 45 17 27 90 fax: (+33 1) 45 17 27 99 info-fr@lemo.com germany lemo elektronik gmbh hanns-schwindt-str. 6 81829 mnchen tel: (+49 89) 42 77 03 fax: (+49 89) 420 21 92 info@lemo.de hong kong lemo hong kong ltd. room 33. 7th floor hitec, 1 trademart drive kowloon bay - hong kong tel: (+852) 2174 0468 fax: (+852) 2174 0492 hk.sales@lemo.com hungary redel elektronika kft vghd u. 26 1201 budapest xx. tel: (+36 1) 421 47 10 fax: (+36 1) 421 47 57 info-hu@lemo.com italy lemo italia srl viale lunigiana 25 20125 milano tel: (+39 02) 66 71 10 46 fax: (+39 02) 66 71 10 66 sales.it@lemo.com japan lemo japan ltd 4-10-3, takaido higashi, suginami-ku, tokyo, 168-0072 tel: (+81 3) 53 44 39 33 fax: (+81 3) 53 44 39 35 lemoinfo@lemo.co.jp netherlands / belgium lemo connectors benelux de trompet 2108 1967 dc heemskerk tel. (+31) 251 25 78 20 fax (+31) 251 25 78 21 info@lemo.nl norway / iceland lemo norway a/s stanseveien 6b 0975 oslo tel: (+47) 22 91 70 40 fax: (+47) 22 91 70 41 info-no@lemo.com spain / portugal iberlemo s.a. brasil, 45, 08402 granollers barcelona tel: (+34 93) 860 44 20 fax: (+34 93) 879 10 77 info-es@lemo.com madrid office antonio lpez, 96, 28019 madrid tel: (+34 91) 469 99 19 fax: (+34 91) 469 99 59 sweden / finland lemo nordic ab marieh?llsv?gen 39a 168 65 bromma tel: (+46 8) 635 60 60 fax: (+46 8) 635 60 61 info-se@lemo.com switzerland lemo verkauf ag grundstrasse 22 b 6343 rotkreuz tel: (+41 41) 790 49 40 fax: (+41 41) 790 49 43 ch.sales@lemo.com united kingdom lemo uk ltd unit 15 & 16 hazelwood trading estate worthing, west sussex, bn14 8np tel: (+44 1903) 23 45 43 fax: (+44 1903) 20 62 31 lemouk@lemo.com usa lemo usa inc p.o. box 2408 rohnert park, ca 94927-2408 tel: (+1 707) 578 88 11 (+1 800) 444 53 66 fax:(+1 707) 578 08 69 info@lemousa.com cat.mh.len.p0908 lemo distributors australia, brazil, canada, czech republic, greece, india, israel, malaysia, new zealand, philippines, poland, russia, singapore, south africa, south korea, taiwan, thailand, turkey, ukraine www.lemo.com

▲Up To Search▲

Price & Availability of FHESH03AXLCT46G

	To Download FHESH03AXLCT46G Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .